J9147AR - HP Procurve E2910al-48G 48-Ports Layer-2 Managed Stackable Gigabit Ethernet Switch with 4 x SFP (mini-GBIC)
Shop all HP parts (82,894) ›- Managed L3 Web-based management
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 48
- 10G support
- Access Control List (ACL)
- 1U Rack mounting Stackable
Was $160.82 · You save $23.82
Key specifications
See full specs ↓- Switch type
- Managed
- Switch layer
- L3
- Quality of Service (QoS) support
- Yes
- Web-based management
- Yes
- System event log
- Yes
- MIB support
- MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, RADIUS Client MIB, RADIUS Accounting MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB
Documents
Product details
HP ProCurve 2910-48G al. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48. Full duplex. MAC address table: 16000 entries, Switching capacity: 176 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. Rack mounting, Form factor: 1U
Specifications
- Switch type
- Managed
- Switch layer
- L3
- Quality of Service (QoS) support
- Yes
- Web-based management
- Yes
- System event log
- Yes
- MIB support
- MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, RADIUS Client MIB, RADIUS Accounting MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB
- Basic switching RJ-45 Ethernet ports quantity
- 48
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Combo SFP ports quantity
- 4
- Networking standards
- IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
- 10G support
- Yes
- Port mirroring
- Yes
- Full duplex
- Yes
- Routing entries
- 2000
- Flow control support
- Yes
- Link aggregation
- Yes
- Rate limiting
- Yes
- Auto MDI/MDI-X
- Yes
- Spanning tree protocol
- Yes
- Switching capacity
- 176 Gbit/s
- Throughput
- 131 Mpps
- MAC address table
- 16000 entries
- Latency (1 Gbps)
- 2.9 µs
- Latency (10 Gbps)
- 1.3 µs
- Packet buffer memory
- 6 MB
- Access Control List (ACL)
- Yes
- MAC address filtering
- Yes
- SSH/SSL support
- Yes
- Multicast support
- Yes
- Rack mounting
- Yes
- Stackable
- Yes
- Form factor
- 1U
- Built-in processor
- Yes
- Processor model
- ARM11
- Processor frequency
- 515 MHz
- Internal memory
- 512 MB
- Flash memory
- 4 MB
- AC input voltage
- 100 - 240 V
- AC input frequency
- 50 - 60 Hz
- Input current
- 2.1 A
- Power consumption (typical)
- 105 W
- Power over Ethernet (PoE)
- No
- Operating temperature (T-T)
- 0 - 55 °C
- Operating altitude
- 0 - 3000 m
- Heat dissipation
- 356 BTU/h
- Width
- 442.5 mm
- Depth
- 365.8 mm
- Height
- 44 mm
Description
The HP 2910 al Switch Series consists of four switches: the HP 2910-24G al and 2910-24G-PoE+ al Switches with 24 10/100/1000 ports, and the HP 2910-48G al and 2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910 al Switch Series supports up to four optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack. Quality of Service (QoS) • Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues Connectivity • 10 Gbps Ethernet connectivity: up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional interconnect kit for short-distance connectivity Performance • High-performance architecture: 128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching fabric with up to 131 Mpps (48-port switches) Resiliency and high availability • IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w Manageability • RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events Layer 2 switching • VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously Layer 3 routing • Static IP routing: provides manually configured routing; includes ECMP capability
Condition: Refurbished
Free U.S. ground shipping
Typically 1–2 days handling, 3–7 days in transit.
Purchase orders accepted
Government, enterprise, data center and small business.
Buying 10+ units?
Get volume pricing and availability for J9147AR.
