J9145A - HP Procurve E2910al-24G 24-Ports + 4 x SFP (mini-GBIC) Stackable Managed Gigabit Ethernet Switch
Shop all HP parts (82,894) ›- Managed L3 Web-based management IGMPv3, SNMPv1/v2c/v3, XRMON
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 20
- 10G support 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T
- Access Control List (ACL)
Was $190.68 · You save $28.30
Key specifications
See full specs ↓- Switch type
- Managed
- Switch layer
- L3
- Quality of Service (QoS) support
- Yes
- Web-based management
- Yes
- System event log
- Yes
- MIB support
- MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB
Documents
Product details
HP E2910-24G al. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports quantity: 20. Full duplex. MAC address table: 16000 entries, Switching capacity: 128 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.3, IEEE...
Specifications
- Switch type
- Managed
- Switch layer
- L3
- Quality of Service (QoS) support
- Yes
- Web-based management
- Yes
- System event log
- Yes
- MIB support
- MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB
- Basic switching RJ-45 Ethernet ports quantity
- 20
- Combo SFP ports quantity
- 4
- SFP/SFP+ slots quantity
- 4
- Networking standards
- IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x
- 10G support
- Yes
- Copper ethernet cabling technology
- 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T
- Port mirroring
- Yes
- Full duplex
- Yes
- IP routing
- Yes
- Routing entries
- 2000
- Flow control support
- Yes
- Link aggregation
- Yes
- Broadcast storm control
- Yes
- Rate limiting
- Yes
- Auto MDI/MDI-X
- Yes
- Spanning tree protocol
- Yes
- Number of VLANs
- 256
- Supported data transfer rates
- 10/100 Mbps
- Switching capacity
- 128 Gbit/s
- Throughput
- 95 mpps
- MAC address table
- 16000 entries
- Number of trunks
- 24
- Number of queues
- 8
- Maximum data transfer rate
- 1 Gbit/s
- Jumbo frames support
- Yes
- Packet buffer memory
- 6 MB
- DHCP features
- DHCP server, DHCP client
- Access Control List (ACL)
- Yes
- IGMP snooping
- Yes
- Security algorithms
- 802.1x RADIUS, SSH, SSL/TLS
- MAC address filtering
- Yes
- Static port security
- Yes
- SSH/SSL support
- Yes
- Multicast support
- Yes
- Management protocols
- IGMPv3, SNMPv1/v2c/v3, XRMON
- Data link protocols
- LLDP
- Supported network protocols
- IPv6, UDP, TFTP, ICMP, TCP, ARP, TELNET, BOOTP, SNTP
- Safety
- EN/IEC, CAN/CSA, UL
- Electromagnetic compatibility
- FCC, EN, CISPR-22, VCCI
- Built-in processor
- Yes
- Processor model
- ARM11
- Processor frequency
- 515 MHz
- Memory type
- SDRAM
- Internal memory
- 512 MB
- Flash memory
- 4 MB
- Noise level
- 53.5 dB
- Input current
- 1.7 A
- Input voltage
- 100 - 240 V
- Power consumption (typical)
- 82 W
- Power over Ethernet (PoE)
- No
- Latency
- 2.9µs/1.3µs
- Dimensions (WxDxH)
- 442 x 365.8 x 44 mm
- Connectivity technology
- Wired
- Networking features
- Gigabit Ethernet
- Wi-Fi
- No
- Input frequency
- 50/60 Hz
- Operating temperature (T-T)
- 0 - 55 °C
- Storage temperature (T-T)
- -40 - 70 °C
- Operating relative humidity (H-H)
- 15 - 95%
- Storage relative humidity (H-H)
- 15 - 95%
- Operating altitude
- 0 - 3000 m
- Heat dissipation
- 279 BTU/h
Description
The HP ProCurve 2910al Switch Series consists of four switches: the HP ProCurve 2910al-24G and 2910al-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP ProCurve 2910al-48G and 2910al-48G-PoE+ Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910al switch supports up to four optional 10-Gigabit (CX4 and/or SPF+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack. Performance • High-performance architecture: 128 Gbps switching fabric with up to 95 million pps (24-port switches) and 176 Gbps switching fabric with up to 131 million pps (48-port switches). Resiliency and high availability • IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w. Connectivity • 10 Gbps Ethernet connectivity: Up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+)--with optional interconnect kit for short-distance connectivity. Layer 2 switching • VLAN support and tagging: supports the IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously. Layer 3 routing • Static IP routing: provides manually configured routing; includes ECMP capability. Quality of Service • Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues. Security • Multiple user authentication methods: IEEE 802.1X: industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server; Web-based authentication: similar to IEEE 802.1X, provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant.
Condition: Refurbished
Free U.S. ground shipping
Typically 1–2 days handling, 3–7 days in transit.
Purchase orders accepted
Government, enterprise, data center and small business.
Buying 10+ units?
Get volume pricing and availability for J9145A.
