Dell A14627997 2GB DDR3-1333MHz UDIMM 2Rx8 CL9 Memory

Product Description

The Dell A14627997 is a 2GB memory module based on DDR3 SDRAM technology, operating at a clock speed of 1333MHz, which corresponds to the PC3-10600 standard. This module is an Unbuffered DIMM (UDIMM), meaning it does not incorporate an onboard register chip. Instead, the memory controller directly interfaces with the DRAM chips. UDIMMs are commonly used in a wide variety of desktop computers, workstations, and entry-level servers where the number of memory modules installed does not place an excessive electrical load on the memory controller. This specific UDIMM is configured as 2Rx8. The '2R' signifies that the module is dual-ranked, containing two independent sets of memory chips (ranks). The 'x8' indicates that each DRAM chip on the module has an 8-bit data width. Dual-rank modules can sometimes offer performance benefits through rank interleaving, where the memory controller can switch between ranks, potentially improving data access efficiency. The CAS Latency (CL) is rated at 9, which defines the delay in clock cycles between the memory controller issuing a read command and the data becoming available from the module. This 2GB DDR3-1333MHz UDIMM is suitable for upgrading or populating memory in compatible Dell systems that support this type of memory. It's a standard component for enhancing system responsiveness, enabling smoother multitasking, and supporting applications that require moderate amounts of RAM. Users should always confirm system compatibility regarding memory type, speed, rank configuration, and maximum supported capacity.