Dell A11928000 2GB DDR3-1333MHz UDIMM 2Rx8 CL9 Memory

Description

The Dell A11928000 is a 2GB DDR3 Unbuffered DIMM (UDIMM) memory module, intended for use in standard Dell desktop computers and some entry-level servers. It operates at a frequency of 1333MHz, identified by its PC3-10600 speed rating, providing a significant performance upgrade over older DDR generations. Unbuffered DIMMs are the most common type of RAM found in consumer PCs, directly connecting the memory controller to the DRAM chips without intermediate registers, which generally results in lower latency for single-module configurations. This module is configured as 2Rx8, meaning it is dual-rank with each rank composed of x8 (8-bit) DRAM chips. Dual-rank configurations can sometimes offer improved performance by allowing the memory controller to interleave access between the two ranks. The CAS Latency (CL) is rated at 9, indicating that it takes 9 clock cycles for the module to respond to a read command after it is issued. This CL9 timing is typical for DDR3 modules at this speed. As a standard UDIMM, the Dell A11928000 does not feature ECC (Error-Correcting Code) functionality. It is designed for systems where data integrity is less critical than in server environments, or where ECC is not supported. This memory module serves as a direct replacement or upgrade for compatible Dell systems requiring DDR3 UDIMMs, offering increased capacity for multitasking and improved overall system responsiveness.

Condition: Refurbished