AT-MC102XL - Allied Telesis 100Base-TX to 100Base-FX (SC) Standalone Media Converter

SKU AT-MC102XL

Brand Allied Telesis

Converts 100Base-TX (Copper) to 100Base-FX (Fiber).
Supports multimode fiber optic cable.
Features SC fiber connectors.
Maximum fiber transmission distance of 2 km.
Auto-negotiation on the copper port.
Standalone unit with external power supply.

Available to order

AT-MC102XL isn't on our shelf today — we source it to order. Request a quote and we'll confirm price and lead time within one business day.

Key specifications

See full specs ↓

Maximum data transfer rate: 100 Mbit/s
Cabling technology: UTP & FO
Connectivity technology: Wired
Power consumption (typical): 6 W
Weight: 294 g
Operating temperature (T-T): 0 - 40 °C

Documents

Brochure Allied Telesis AT-MC102XLBrochure · PDF

Product details

Allied Telesis 100TX to 100FX (SC) standalone media converter. Maximum data transfer rate: 100 Mbit/s, Cabling technology: UTP & FO. Connectivity technology: Wired. Power consumption (typical): 6 W. Weight: 294 g. Safety: UL-Cul, CSA/CSA, NRTL, TUV, CE

Network

Maximum data transfer rate	100 Mbit/s
Cabling technology	UTP & FO

Ports & interfaces

Connectivity technology

Wired

Power

Power consumption (typical)

6 W

Weight & dimensions

Weight

294 g

Operational conditions

Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-20 - 80 °C
Operating relative humidity (H-H)	5 - 95%

Certificates

Safety

UL-Cul, CSA/CSA, NRTL, TUV, CE

Logistics data

Harmonized System (HS) code

85176990

Other features

Data link protocols	IEEE 802.1Q
Dimensions (WxDxH)	105 x 95 x 25 mm
Interface	Fast Ethernet
Electromagnetic emissions	FCC Class B
I/O ports	RJ-45 SC

Description

Fibre connections The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre. Auto-negotiation and MissingLink™ The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost. Simple installation Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment. Standalone or rackmounted Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.

Condition: Refurbished